Inner Tacho (rev counter) Cable (fits inside your old cable outer)

We advise you to measure your existing cable before ordering in case you have a non standard set up.

 5 in stock

Inner Tacho (rev counter) Cable (fits inside your old cable outer)

We advise you to measure your existing cable before ordering in case you have a non standard set up.

 More than 5 in stock

Complete (rev counter) tacho cable

We advise you to measure your existing cable before ordering in case you have a non standard set up.

 More than 5 in stock

19768100-z 19768100 GU19768100 19 76 81 00
 1976 8100 1976.8100 19.76.81.00

Complete tacho (rev counter) cable

We advise you to measure your existing cable before ordering in case you have a non standard set up.

 5 in stock

14768150-z 14768150 GU14768150 14 76 81 50
 1476 8150 1476.8150 14.76.81.50

Crankshaft tab washer for timing chain gear nut in timing chest

Secures cam chain gear nut

 5 in stock

95028025-z 95028025 GU95028025 95 02 80 25
 9502 8025 9502.8025 95.02.80.25

Right hand Domino type starter switch for use with separate throttle, e.g. Tommaselli twin pull throttles ACA10500 or ACA10501

On most bikes this will not plug directly into the wiring loom, you will need to match the wires to your loom. If replacing 'Lego' type switchgear (e.g. Le Mans 2, V50) with integrated twistgrip you will need a separate twistgrip, see ACA10500 and ACA10501. Packaging may include explanation of switchgear wire covers. This type originally fitted as standard to the early V11 Sport models. See the wiring diagram on our technical documents page for help installing this switchgear.. Molex connectors available separately.

 1 in stock

 01738800 GU01738800 01 73 88 00
 0173 8800 0173.8800 01.73.88.00

CEV type lights (off/pilot/on), main beam and horn switch. Supplied without wires, you will need to solder your wiring into the switchgear using a minimum 60W soldering iron. Switch fixes to handlebars using included screws

Can be fitted to left or right side of bars

 This part is due back in stock soon, call 01484 841395 to reserve yours

12746001-z 12746001 GU12746001 12 74 60 01
 1274 6001 1274.6001 12.74.60.01

Left hand Domino type switchgear with high and low beam, pass, indicator and horn switches. Same style switch as ELA01738

On most bikes this will not plug directly into the wiring loom, you will need to match the wires to your loom. An indication of wire colours is supplied with this switchgear. Supplied with 9 pin block connector. NB does not have lights off - park - on function, you need this to be on your RH switch (e.g. ELA01729 ) or run lights always on

 This part is available by special order, request a quote

CEV type indicator switch. Supplied without wires, you will need to solder your wiring into the switchgear using a minimum 60W soldering iron. Switch fixes to handlebars using included screws

Can be fitted to left or right side of bars

 This part is due back in stock soon, call 01484 841395 to reserve yours

12750300-z 12750300 GU12750300 12 75 03 00
 1275 0300 1275.0300 12.75.03.00

Swing arm pivot stub, metric fine thread. See TRA92780 for cover nuts. Replaces Guzzi ref. 14547000

 2 in stock

 14547001 GU14547001 14 54 70 01
 1454 7001 1454.7001 14.54.70.01